Kako koristiti visokotemperaturni regulator temperature kalupa
Visokotemperaturni regulator temperature kalupa općenito se dijeli na visokotemperaturni regulator temperature ulja i visokotemperaturni regulator temperature vode. Anyda visokotemperaturni regulator temperature kalupa usvaja napredne komponente, pumpu za vodu/uljnu pumpu niske potrošnje energije, dug radni vijek, nisku razinu buke, male vibracije, brzu brzinu grijanja i hlađenja, temperatura je točna i stabilna, jedinstveni dual- Dizajn električnog grijanja prikladan je za korištenje na različitim temperaturama-mjestima s kontroliranom temperaturom, potpuno je otporan na rđu-i anti-tretman protiv korozije, što je sigurno i dugo- . To je vaš najbolji izbor. Kako onda koristiti visokotemperaturni stroj za temperaturu kalupa? Dođi to provjeriti sa mnom.
Step 1: Check and set before the test machine, and check whether the oil, electricity, gas and pipeline of the mold temperature machine are normal.
Step 2, start the oil pump and check whether the steering of the oil pump and the rotation of the fan are correct, and then make sure that the fan and the oil pump can operate normally.
Step 3, refuel. The heat transfer oil is added to the oil tank of the expansion tank, and the heat transfer oil is input into each part of the oil carrier body through the heat transfer oil circulation, and then the mechanical operation is carried out.
The fourth step is to observe during the work, whether there is leakage of gas, whether there is leakage in the pipeline, and at the same time, we also need to determine whether the pressure is normal during the operation of the mold temperature machine.
